5 Things To Know About How To Use Soldering Station

How to Use Soldering Station

As the idea of people doing their own secure and reliable electronic projects continues to become popular, so do tons and tons of soldering station manufacturers continue to flock the market.That makes it a little hard for a person who wants to perform their electrical project because they don't know which one is the best and on top of it all they don't know how to use one effectively. 

So if you are among this group of people trying to learn how to use soldering station, then your lucky star is shimmering brightly on you because below is all the information you need to know on matters soldering.

What is a Soldering Station?

Before we dive in too deep on how to use one, it is essential that you understand what a soldering station is as most people often confuse it for the soldering iron, but we are here to be of complete help, so we'll go the extra mile in reminding you. A soldering station can just be referred to as a soldering iron which comes with a unit which controls temperature. 

It holds your hot iron and helps you keep your solder and tip cleaner more organized because it even comes with a molded storage space which ensures better maintenance.

So in this article, you'll be learning how to use the entire station and not just the iron. It is mostly used in PCB assembly and mass repairing of circuit boards, but you can also use it at home for your do it yourself projects.

These stations are available in analog and digital units, so it's up to you to know which meets and exceeds your requirements and also expectations. How do you differentiate them? Analog stations just like the name suggests, have no digital display for the temperature and for you to change it, you need to use the knobs thus you might not always get the accurate temperature unless you have been using it for long. 

Digital units, on the other hand, are the complete opposite as they boast an LCD readout which shows temperature hence allowing the user to be more precise especially when using specific materials. However, you might have to pay a few extra bucks for a digital soldering station. All soldering stations contain flux such as rosin to ensure that the solder flows correctly on the surface.

How to Use Soldering Station

Now that we already know what a soldering station is, its time you learn how to use it. Below is a step by step guide to ensure that you never have to hire someone else to do your projects for you.

Setting up the workstation

As with any other equipment, before you begin using a soldering station, you must first set up your working place. Whether it's in your garage or any other area, ensure that you set the station well, somewhere on a counter-top or any other even surface to prevent it from wiggling or falling over as you work.

Also, clear the area and remain only with the relevant equipment and ensure it is safe for you to begin. Once this is ready get your safety glasses and put them on.

Tip selection

Most digital and even some analog units come with interchangeable tips. Start by choosing the most favorable one for your project. Mostly your choice is often affected by the kind of materials you are using and also the sort of task at hand. For instance, most artwork projects use a thin tip.

Iron preservation

Before you begin working, you should ensure everything is in check, and one of the main components is the iron. So dampen the sponge which comes as part of the station and is used to cool the solder tip. The sponge should only be slightly wet so be careful while moistening it.

The tinning process

Just before you begin soldering, ensure that you apply a little amount of solder on the tip and then wipe any excess to the sponge mentioned earlier. The solder should be applied on the tip and also the joint as this ensures a smooth sailing process.

Select the temperature

Next set your temperature. It should not be too high and neither should it be too low. Instead, it should be on a point which heats the work rapidly or which allows the solder to melt more quickly whenever the tip is brought to it. Ensure that once the solder melts a little amount of it remains on the tip to prevent corrosion.

Now get to work

Once you finish all the above steps, it's time to get that project done. However, ensure that you wipe every time you finish soldering a surface which means it is after every several minutes that you stop to take a break or for whichever reason ensure you repeat the process so you can get almost if not perfect results and also protect the tip from rusting.

Final thoughts

Using a soldering station is not as hard as most people try to make it look. Most professionals will make it look hard so you can hire them yet it’s something you can easily do yourself.

All you need is to ensure proper cleaning of the tip and also ensure that you don’t leave it unattended as it poses a safety hazard to anyone who does not know how to use it.

Willie Ryan
 

Click Here to Leave a Comment Below 0 comments

Leave a Reply: